ATG | Veeder-Root

Detecting and Reducing Loss in Your Fueling System

ATG

June 8, 2019 | Veeder-Root

Identifying and minimizing all sources of variance within a fueling operation clarifies a company status at any time

Guidelines for using ATGs during the COVID-19 pandemic

ATG

April 10, 2020 | Veeder-Root

Gas stations and convenience stores must take new safety precautions for sanitizing shared fueling equipment

Remote Connectivity for the Veeder-Root TLS-4xx Series Tank Gauges

Connecting remotely to Veeder-Root Tank Gauges

ATG

March 24, 2020 | Veeder-Root

It’s critically important for businesses to be able to connect remotely to their tank gauges and view fuel site status

Managing time settings on your Automatic Tank Gauge

ATG

March 6, 2020 | Veeder-Root

Updating the clock settings for ATG consoles for managing Daylight Savings Time automatically

Protecting Gas Station and Fuel Site Data

ATG

January 16, 2020 | Veeder-Root

There is a tradeoff between authorized people being able to easily access equipment and protecting that equipment from unwanted access.

Visit Veeder-Root at the 2019 NACS Show

ATG

September 23, 2019 | Veeder-Root

Visit Veeder-Root at this year's NACS Show and see how our products elevate your fuel management

What Can Happen If You Do Not Take Ownership Of Your Network?

Security

May 15, 2019 | Veeder-Root

Six functions hackers could exploit in your network if you do not take care to secure your data.

Ensuring Safety and Compliance Through UST Leak Protection Methods

ATG

January 10, 2017 | Veeder-Root

Nearly 27% of USTs regulated by the EPA are not in significant operational compliance with requirements

Phase Separation - What Are the Implications?

Compliance

February 28, 2020 | Veeder-Root

Ethanol is on the rise, and subsequently so is phase separation. Over 90% of U.S. gas stations are blending their gasoline with ethanol, and the number is only rising.

Are inaccurate tank charts contributing to your fuel variance?

ATG

February 24, 2017 | Veeder-Root

Stick or probe measurements are only as good as the tank chart that you reference when calculating your tanks ullage.