TLS-450PLUS and TLS4 ATG Console Software
Download current software and documentation at no charge to your computer. Unzip the file and then the TLS-4xx Series software can be copied to a standard FAT-32 thumb-drive to upgrade a site console. The thumb-drive can be used at multiple sites to upgrade the software. Note that software cannot be downgraded from a newer version. The current software version, 11.B.
IQ2 Software Downloads
Download the most up-to-date version of the IQ2 operating software, 4.03.
Note: IQ2 Firmware 4.03 requires TLS software 11.B or higher to integrate the Red Jacket IQ2 Smart Controller with the TLS-450PLUS ATG. To use the IQ2 with a TLS-450PLUS ATG running version 11.B software, the IQ2 firmware MUST be upgraded to version 4.03.
CDM Software Download
Download the most up-to-date version of the CDM operating software. The current software version is 2.0.44.
TLS-IB Console Software Downloads
TLS-IB RS-232/485 CONFIGURABLE SOFTWARE
The TLS-IB FIRMWARE UPGRADE PROGRAM is to be installed on a PC and used to download the TLS-IB FIRMWARE UPGRADE file to the TLS-IB RS-232/485 Configurable console.
TLS-IB FIRMWARE UPGRADE PROGRAM
The current software version, 1-A, was released in May 2018.
TLS-IB FIRMWARE UPGRADE
The current software version, 1-B, was released in May 2018.
EMR4 Software Downloads
Download the most up-to-date versions of the EMR4 operating software
Contractors holding valid Technician Certifications are approved to perform installation, programming, operations training, and startup for all Veeder-Root Series Tank Monitoring Systems.