Continuously measure the density of your fuel
The Magnetostrictive Density (MAG-D) In-Tank Probe with optional 0.1 & 0.2 GPH in-tank leak detection and water monitoring capabilities can be used for gasoline and diesel tank applications.
Designed with fuel integrity in mind
The MAG-D probe measures fuel density to detect the disbursement of substandard fuel. The Veeder-Root MAG-D probe has a specialty float system and is a cost effective and practical way to continuously measure the density of fuel.
This in-tank probe solution for density measurement is certified to exceed U.S. EPA performance standards. Using the MAG-D probe provides quick and accurate density measurement of fuel during a delivery using a temperature-compensated density factor. You can view these measurements in real time on your Veeder-Root Automatic Tank Gauge.
Product Form
Magnetostrictive Density (MAG-D) In-Tank Probe
Part Number |
Description |
Certification |
846397-7XX |
MAG-D Stainless Steel 0.1 GPH In-Tank HGP Probe with Leak Detection |
UL |
846367-7XX |
MAG-D Stainless Steel 0.1 GPH In-Tank HGP Probe with Leak Detection |
ATEX |
846397-8XX |
MAG-D Stainless Steel 0.2 GPH In-Tank HGP Probe with Leak Detection |
UL |
846367-8XX |
MAG-D Stainless Steel 0.2 GPH In-Tank HGP Probe with Leak Detection |
ATEX |
846397-9XX |
MAG-D Stainless Steel In-Tank HGP Probe, No Leak Detection |
UL |
846367-9XX |
MAG-D Stainless Steel In-Tank HGP Probe, Inventory Only, HGP, No Leak Detection | ATEX |
MAG-D Probe Installation Float Kits
Part Number |
Description |
886001-100 |
Install Kit, MAG-D, HGP, Gasoline, 2 in. Float, 5 ft. Cable |
886001-101 |
Install Kit, MAG-D, HGP, Diesel, 2 in. Float, 5 ft. Cable |
Key Benefits
-
The non-corrosive, stainless-steel tubing of the MAG-D probe is designed for long-lasting fuel monitoring to address the ever-evolving changes in the fuel chemistry of products such as Bio-Diesel
-
Highly accurate magnetostrictive measurement technology
-
Compatible with gasoline and diesel blends
-
Accurate multi-point temperature sensing to provide extreme accuracy for inventory control and in-tank leak detection
-
Provide fast, accurate density measurements including water to protect your fuel inventory investment
-
Certified performance for inventory control and in-tank leak detection in gasoline, diesel and more
Leak Detection Specifications
Density Range – Gas |
43.1 - 50.0 lb / ft3 |
Density Range – Diesel |
50.0 - 56.2 lb / ft3 |
Accuracy |
± 0.13 lb/ft3 |
Resolution |
± 0.01 lb/ft3 |
Repeatability (15°C) |
± 0.03 lb/ft3 |
Minimum Detection Height Fuel |
8.0 inches (200 mm) |
Minimum Detection Height Water |
0.87 inches (22 mm) |
Temperature Range |
-40°F to 132°F |
Documents
The TLS-MAG-D Float Kit is not compatible with the Veeder-Root MAG or MAG PLUS Probes. They must be used with TLS-MAG-D Probes.
The TLS-MAG-D system is compatible with Veeder-Root TLS-450PLUS and TLS4 Series Automatic Tank Gauges.