898 Cellular Pressure Exi Sensor

Features & Benefits

• Reports local temperature, radio signal strength, and battery level
• External antenna option for underground locations
• Remote re-configurability  
• Plug and play installation
• Mounting/attachment options – wall/pole
• ATEX approved, International compliance
• 1-year warranty

Functionality

• Accurate, reliable tank level monitoring
• Highly configurable server reporting interval from hourly to once per month
• 28 slot logger with configurable logging interval
• Optimize delivery or collections
• Programmable Alarms
• Low and high levels
• Rate of level change (fill or drain)  
  • 24/7 remote tank monitoring

Applications

• Liquid level monitoring  
  • Fuel – Gasoline, Diesel, Kerosene, Other
  • Oil and Waste Oil, Lubricants, Coolants, Additives
  • Water, Chemicals (subject to compatibility)
• Tanks
  • Fixed or mobile
  • Underground
• Spot and continuous inventory measurement
• 0.3 bar / 5m cable provided as standard  

_{* This product may not be suitable for monitoring of certain corrosive and hazardous chemicals. List of product compatible chemicals to be verified with a Veeder-Root representative.}  

Specifications

Specifications	Liquid Level Logger 4G LTE-M	Pressure Sensor
Dimensions
Safety IECEx/ATEX	Ex ia IIB T4 Ga Class I zone 0 AEx ia IIB T4 Ga Complies with UL 913 II 1 G-Ex ia IIB T4 Ga [-30 < Ta < +55°C] SIRA15ATEX2103 X IECEx CSA 15.0006X	SEV 12 ATEX 0138 II 1 G Ex ia IIC T4 Ga IECEx SEV 12.0006 Ex ia IIC T4 Ga Complies with UL 913, Class 1, Zone 0
Operating Temperature	-30°C to +55°C / -22°F to +131°F	-20°C to +80°C / -4°F to +176°F
Storage Temperature 2	0°C to +30°C / +32°F to +86°F	0°C to +30°C / +32°F to +86°F
Sensor Range 1	Sensor - 1 bar / 14.5 psi, suitable for measuring up to 10.2m/33.4ft of water / 12.4m/40.6ft of kerosene. Cable lengths are 5m(16.4ft),10m(32.8ft),15m(49.2ft) as standard.
Environmental Protection	IP68 – Outdoors	IP68 – Outdoors
Communication	LTE CAT-M1 or NB-IoT with GPS	N/A
Installation	Plug and play installation. Can be shipped pre-configured with SIM including connectivity for 3 years.
Power Requirements	Battery pack installed with a 2-wire harness included	5V +/- 10% DC (Powered by Logger)
Battery Technology	3.6V Lithium Thionyl Chloride Exi “Bobbin type” construction	N/A
Housing Material	Molded plastic, 2-part, material Glass Reinforced Polyamide, UV resistant	PD-HD Cable, SS 316L housing, EPDM seal
Weight	Product weight with 5m,10m,15m cable length: 1045g/37oz ; 1150g/40oz ; 1255g / 44oz (including cable & gland/external adapters)
Resolution 3	N/A	0.5% of FS
Accuracy	N/A	Max: +/- 2% of FS: Typical +/- 1% of FS. -20°C to 55°C / -4°F to 131°F
Battery Life 4	Up to 10 years	N/A
Manual Activation	Magnetically activated reed switch / Audible buzzer / Internal LED	N/A
Humidity	0 – 100% RH	0 – 100% RH
Certification 5	PTCRB, AT&T & Verizon approvals, RED, FCC, CE, RoHS, ATEX, IECEx, Complies to UL 913 C1 D1	ATEX, IECEx, CE, EN 61326-2-3, EN 61010-1, EMC directive 2014/30/EU

^{1 When selecting the required pressure sensor cable length; please also consider the LTE logger desired mounting location. If the tank height is similar to the length of the cable, then there may be insufficient cable available to install the LTE logger in the desired location.}

^{2 To maintain optimum battery health during storage.}

^{3 FS (Full Scale) of rated pressure.}

^{4 Based on 1 communication per day and good network coverage.}

^{5 The pressure probe electronic ground is referenced to the metal casing of the probe. Equipotential grounding is recommended for battery powered floating systems. An earth connection should be made from the logger unit 0V reference to the body of the metal tank being monitored by the pressure probe – refer to the installation guide for further details.}

Conformity

Product Form

Note: All Liquid Level Measuring Sensors (LLMS) can be monitored by the EKOS cloud-based solution. Contact your Veeder-Root sales representative for more information on the EKOS platform.