Vapor Sensor

For TLS-350R and TLS-350

Veeder-Root's Vapor Sensor detects the presence of hydrocarbon vapors in a dry monitoring well which could mean a dangerous leak When vapors are detected that exceed a programmed threshold, the sensor sends a signal to a TLS-350R or a TLS-350 console. The monitor's visual and audible built-in alarm indicators immediately tell you where the problem is, so you can quickly take action to prevent serious safety and environmental problems.

Veeder-Root Vapor Sensor can be used in dry monitoring wells. Only three wires are required to connect the sensor to a TLS-350R or TLS-350 or System.

Features

Hydrocarbon vapor exceeding the programmed threshold triggers a Fuel Alarm
Liquid present in the monitoring wells triggers a Water Alarm
Withstands removal and replacement from monitoring well without sensor damage

Temperature Rating

Storage: -40 degrees C to +75 degrees C
Operating: -20 degrees C to +70 degrees C

Dimensions: 4.88" long, 1.06 diameter
Power Requirements: Intrinsically safe power supplied by Veeder-Root TLS-350R, TLS-350 or ILS-350 system

Standard Models

Form No.	Description
794390-700	Vapor Sensor for Monitoring Wells

Vapor Sensor Console Capability

The Series 7943 Vapor Sensor is compatible with the following consoles:

Console	Series
TLS-350R*	8482
TLS-350*	8570

*A Vapor Sensor Interface Module is required for use of the Vapor Sensor with the TLS-350R or TLS-350 console.

-	Related Links and Documents


»	Groundwater Sensor Installation Guide (576013-763 Rev E) (PDF)
»	Vapor Sensor for ILS-350, TLS-350 and TLS-350R - Installation Guide (576013-607 Rev B) (PDF)
»	Sensor Products - Application Guide (577013-750 Rev M) (PDF)

Features

Temperature Rating

Standard Models

Vapor Sensor Console Capability

Contact Us | Danaher Corp | Gilbarco | Gasboy | Privacy | Legal | Site Map