Designed to provide the highest quality and most cost effective solutions for monitoring tanks and other environmentally sensitive areas at gasoline retail operations, the TLS-300 8/8 is capable of monitoring up to 8 probes and 8 sensors.

Standard capacity of the TLS-300 8/8 is up to eight Veeder-Root series 7943 float switch sensors. This high quality, low cost family of sensors includes interstitial leak sensors for steel and fiberglass tanks, piping sump sensors, hydrostatic sensors and discriminating dispenser pan and containment sump sensors.

The TLS-300 8/8 will also allow for connectivity with up to eight 8473 and 8468 Magnetorstricitve probes for in tank inventory and water measurement.

The TLS-300 8/8 can also be upgraded to provide 0.1 GPH or 0.2 GPH static in-tank leak detection. An additional option is an internal SiteFax communication module, which allows dial in and dial out of information through direct modem communication.

Features

• System monitors up to eight tanks
• System monitors up to eight interstitial and sump sensors
• RS-232 Communication interface with auxiliary port provides two 25-pin D-connectors for data transmission to computers or point of sale terminals
• Automatic continuous leak sensing: tank interstitial space; piping sump
• Audible alarm and display indicators
• In tank warnings and alarms are activated for the following conditions; leak, overfill, low product, sudden loss, high water, delivery needed, test failure and tank test not performed.
• Interstitial and piping sump warnings and alarms are activated for the following conditions: fuel presence, low liquid and high liquid.
• Alarm relays can trigger external alarm/ security devices
• Two built-in inputs provide for solid state or switch input from external devices
• Two built-in output relays provide for outputs to overfill alarms and external audible and visual warning devices
• Either relay can shut down the submersible if power to the monitor is lost or a leak is detected

Options

• Built-in SiteFax modem for remote management of inventory, delivery and leak detection information
• 0.1 GPH or 0.2 GPH static in-tank leak detection
• 0.2 GPH continuous in-tank leak detection

Standard Models

Console Form No	Description
848590-012	TLS-300 8/8 UL without printer
848590-013	TLS-300 8/8 UL with printer
848560-013	TLS-300 8/8 BASEEFA with printer
848560-014	TLS-300 8/8 BASEEFA without printer

In-tank probe compatibility
Console Form Number: 847390-1xx
Description: UL Mag 1 Magnetostrictive probe with 0.1 GPH leak detection capability

Console Form Number: 847360-1xx
Description: BASEEFA Mag 1 Magnetostrictive probe with 0.1 GPH leak detection capability

Console Form Number: 847390-2xx
Description: UL Mag 2 Magnetostrictive probe with 0.2 GPH leak detection capability

Console Form Number: 847360-2xx
Description: BASEEFA Mag 2 Magnetostrictive probe with 0.2 GPH leak detection capability

Console Form Number: 846861-1xx
Description: Inventory only Magnetostrictive probe