TLS-350J

Veeder-Root's TLS-350J Monitoring System features in-tank leak detection, electronic line leak detection and discriminating sensing capability for up to 4 tanks/lines/sensors to meet regulatory compliance requirements at your site. The system comes equipped with Continuous Statistical Inventory Leak Detection (CSLD) which provides continuous 24-hour leak detection without tank shut down.

The TLS-350J comes equipped with standard or wireless electronic line leak detection for up to three lines. The risk management software will perform 0.1 GPH, 0.2 GPH and 3 GPH leak tests to meet EPA compliance requirements. Veeder-Root's electronic line leak detection is suitable for a variety of pipe types.

All systems support up to three Series 8473 Magnetostritive Probes. The Mag probes handle a wide variety of fuels and fluids and have been third party tested and certified to perform better than U.S. E.P.A. standards. Standard integral printer provides fast, quiet printouts.

The TLS-350J will accommodate three Veeder-Root float switch sensors including: interstitial sensors for both steel and fiberglass tanks, piping sump sensors, hydrostatic sensors and discriminating dispenser pan and containment sump sensors.

The TLS-350J systems are equipped with audible and visual alarms, triggered by in-tank and interstitial alarm condition. Any of the in-tank alarm limits can be tied to relays to trigger on-site devices, such as overfill alarms, or to shut down the submersibles.

Features

• The total compliance solution for 2 and 4-tank/line systems
• Built-in CSLD for continuous 24-hour leak detection
• Supports PLLD and WPLLD for up to 4 lines
• Supports up to three sensors for dispenser pan or containment sump sensing
• Communication compartment has space available for three additional options; spaces can be filled with any standard TLS-350 communication board
• High power compartment will accept up to 8 input/output modules
• Built-in inputs provide for solid-state or switch input from external devices
• Built-in outputs provide for overfill and external audible and visual warning devices.
• Either relay can shut down the submersible if power to the monitor is lost or a leak is detected

Kit Form Number: 847095-322
Description: TLS-350J console with integral printer, CSLD, PLLD risk management software, six input, three input PLLD line leak interfaces and three sensor input interfaces.

Kit Form Number: 847095-422
Description: TLS-350J console with integral printer, CSLD, WPLLD risk management software, six input, three input WPLLD line leak interfaces and three sensor input interfaces.

Kit Form Number: 847095-522
Description: TLS-350J 4-Tank/4 Sensor/4 PLLD Console with static in-tank leak detection and PLLD Risk Management Software with Integral Printer.

Kit Form Number: 847095-622
Description: TLS-350J 4-Tank/4 Sensor/4 WPLLD Console with static in-tank leak detection and WPLLD Risk Management Software with Integral Printer.

The following probes and sensors are compatible with the TLS-350J Monitoring System

Form No.	Description
846390-XXX	Mag Plus Probe
794390-40X	Interstitial sensor for fiberglass tanks
794390-420	Interstitial sensor for steel tanks
794390-208	Piping sump sensor
794380-301	Single-float hydrostatic sensor
794380-302	Dual-float hydrostatic sensor
794380-322	Discriminating dispenser pan sensor
794380-352	Discriminating containment sump sensor

Contact Us | Danaher Corp | Gilbarco | Gasboy | Privacy | Legal | Site Map