 | ||||||||||||||||||||||||||||
 |  |
|||||||||||||||||||||||||||
|
|
TLS-350J UST Monitoring SystemsVeeder-Root's TLS-350J Monitoring System features in-tank leak detection, electronic line leak detection and discriminating sensing capability for up to 4 tanks/lines/sensors to meet regulatory compliance requirements at your site. The system comes equipped with Continuous Statistical Inventory Leak Detection (CSLD) which provides continuous 24-hour leak detection without tank shut down. The TLS-350J comes equipped with standard or wireless electronic line leak detection for up to three lines. The risk management software will perform 0.1 GPH, 0.2 GPH and 3 GPH leak tests to meet EPA compliance requirements. Veeder-Root's electronic line leak detection is suitable for a variety of pipe types. All systems support up to three Series 8473 Magnetostritive Probes. The Mag probes handle a wide variety of fuels and fluids and have been third party tested and certified to perform better than U.S. E.P.A. standards. Standard integral printer provides fast, quiet printouts. The TLS-350J will accommodate three Veeder-Root float switch sensors including: interstitial sensors for both steel and fiberglass tanks, piping sump sensors, hydrostatic sensors and discriminating dispenser pan and containment sump sensors. The TLS-350J systems are equipped with audible and visual alarms, triggered by in-tank and interstitial alarm condition. Any of the in-tank alarm limits can be tied to relays to trigger on-site devices, such as overfill alarms, or to shut down the submersibles.
Features
Kit Form Number: 847095-522 Kit Form Number: 847095-622 The following probes and sensors are compatible with the TLS-350J Monitoring System
|
|||||||||||||||||||||||||||
Contact Us | Danaher Corp | Gilbarco | Gasboy | Privacy | Legal | Site MapCopyright © 2007 The Veeder-Root Company All rights reserved. Unauthorized duplication prohibited. |
||||||||||||||||||||||||||||