Sump Sensor

Positive Alarm Indication of any Liquid in Underground Fuel Storage Tank Piping Sumps

Veeder-Root's Sump Sensor detects the presence of liquid in a UST sump. Liquid presence could mean a dangerous line leak. When the sensor detects liquid, it sends an alarm signal to the TLS console monitor, where both visual and audible built-in alarm indicators immediately identify the location of the problem. You can then quickly take action to help prevent serious

Features

Positive alarm indication of any liquid in underground fuel storage tank sumps
For TLS-350R, TLS-350 TLS-350J, ILS-350, TLS-300i, TLS-250i and ILS-250 UST Monitoring Systems
System indicators pinpoint alarm location
Simple to install
Two-wire connection to system monitor
Complete with all mounting hardware

Standard components

Quantity Description

1 Sump Sensor Assembly

2 Mounting Strips

1 Watertight Cord Grip

3 Screws for Mounting

Standard Models

Form No. Description

794380-208 Sump Sensor - 12 ft cable

794380-209 Sump Sensor - 30 ft cable

The Series 7943 Sump Sensor is compatible with the following consoles:

Console. Series

TLS-350R* 8482

TLS-350* 8470

TLS-350J 8470

ILS-350** 8450

TLS-300i 8485

TLS-300C 8485

TLS-250i Series 7941

TLS-250 7942
*Note: an Interstitial Sensor Interface Module is required for use of the piping sump sensor with the TLS-350 or TLS-350R system.
**Note: a Two-Wire Module is required for use of the piping sump sensor with the ILS-350 system.

Standard Specifications

Power Requirements: Intrinsically safe power supplied by Veeder-Root TLS-350R, TLS-350, TLS-350J, ILS-350, TLS-300i, TLS-300C, TLS-250i, or ILS-250 system

Sensor

Type: Hermetically sealed magnetic reed
Contact Rating: 15 watts
Switch Travel: 7/8 inch to contact

Temperature Rating

Storage: -40 degrees C to + 74 degrees C
Operating: -0 degrees to +60 degrees C

Housing Material

PVC Schedule 40 Tubing

-	Product Brochures


»	Mag Sump Sensor Brochure (576047-070 Rev F) (PDF)

-	Related Links and Documents


»	Stand-Alone Dispenser Pan Sensor with Dispenser Control Interface Installation Manual (576013-845 Rev C) (PDF)
»	Point Sensor - Liquid Contact Product Detectors - Certification Reports - Results of U.S. E.P.A. Standard Evaluations (576013-864 Rev G) (PDF) Products: TLS-350, TLS-300, TLS-300i, ILS-350, EMC, EMC BASIC, ProMax, ProPlus, Simplicity
»	Liquid-Phase Product Detectors - Results of U.S. E.P.A. Standard Evaluations (576013-917 Rev. B) (PDF) Products: 847990-001, 847990-002
»	Sensor Products - Application Guide (577013-750 Rev M) (PDF)
»	Addendum Dispenser Sensors and Containment Sump Sensors for TLS Consoles Installation Manual (577013-724) (PDF)
»	Dispenser Pan Sensors & Containment Sump Sensors Installation Guide (576013-306 Rev F) (PDF)
»	Mag Sump Sensor Installation Guide (577013-812 Rev E) (PDF)
»	Position-Sensitive Pan/Sump Sensor Installation Guide (577013-809 Rev C) (PDF)
»	Sump Sensor Installation Guide (576013-301 Rev D) (PDF)