Groundwater Sensor
Hydrocarbon Detection In Wet Monitoring Wells
Veeder-Root's Groundwater Sensor detects free hydrocarbon product on the water table in up to 20" deep monitoring wells. The sensor also features a "Water Out" alarm to let you know that the water level has fallen below the sensor and fuel can no longer be detected.
In addition, the sensor's watertight, lockable cap prevents accidental fuel spills on the ground surface from entering and contaminating the monitoring well.
- Fulfills local, state, and Federal electronic groundwater monitoring requirements
- Ideal monitoring method for areas with high water table
- Not sensitive to background vapors
- Lockable, watertight cap for 4" monitoring wells prevents accidental spills into the monitoring well
- Long-life, reusable sensing element
Features
- All liquid hydrocarbons in C5 to C16 range
- Detects as little as 1/10" free product on water table
- "Water Out" alarm informs you when water table is low and you are no longer in compliance
- Responds to gasoline in 15 minutes or less; longer in other hydrocarbons in the C5 to C16 range
- Simply remove sensor from well and expose to air after sensor alarms
Standard Models
| Form No. |
Description |
| 794380-621 |
Groundwater Sensor for 7" to 10" wells |
| 794380-622 |
Groundwater Sensor for 10" to 15" wells |
| 794380-624 |
Groundwater Sensor for 15" to 20" wells |
Groundwater Sensor Console Capability
The Series 7943 Groundwater Sensor is compatible with the following consoles:
*A Groundwater Sensor interface Module (Form No. 329399-001) required for use of Groundwater Sensors with the TLS-350R or TLS-350 systems.
**A four-input, three-wire module (Form No. 329357-001) required for use of Vapor Sensor with ILS-350 systems.