Solid State Pulse Transmitter by Veeder-Root® | Veeder-Root

Solid State Pulse Transmitter

Solid State Pulse Transmitter

Solid state pulse transmitters provide fast and accurate signaling for remote indication, totalizing and data-monitoring systems. Dependability and reliability are built in.

Key features:

  • Solid state switching mechanism for reliability
  • Easy directional sensing

Key benefits:

  • UL listed, CSA certified (BASEEFA approved models are available)
  • Solid state switching mechanism for reliability
  • Easy directional sensing
  • Flexible single or dual channel
  • Optional one-way clutch

Recommended Operating Conditions

Each channel:

  • Supply Voltage (VCC): 10 to 15 VDC, 75 mA max at 15 VDC.
  • Output: Dependent on load.
  • Switching Times: Rise Time: 2 microseconds maximum with 10 mA resistive load to ground. Fall time: 4 microseconds maximum.
  • Rotation: Standard is bidirectional, customer specified. Optional models available with no-back feature.
  • Input Shaft Speed: 600 rpm maximum.
  • Torque: 2 oz-in. maximum (144 gm-cm).
  • Output Pulse: Dual channel at 50 ppr, staggered or overlapping. Single channel at 100 ppr.
  • Duty Cycle: Overlapping/Quadrature: 50% +-10% high/low ratio. Second channel phase displaced by 90 degrees +-18 degrees.
  • Staggered: 75% +-5% high/low ration. Second channel displaced by 180 degrees +-18 degrees.
  • Single Channel: 50% +-10% high/low ratio.
  • Circuit Class: For National Electrical Code Class 2 circuits only.
  • Operating Environment: -40 degrees to 180 degrees F (-40 degrees to 82 degrees C).
  • Storage Environment: -67 degrees to 257 degrees F (-55 degrees to 125 degrees C).
  • Shaft: Specify length of either 0.956 or 1.672 inch (24.28 or 41.80 mm).
  • Shock: Normal Shipping.
  • Housing: Explosion-proof. For use in hazardous locations Class 1, Groups C&D.
  • Mounting: Three 1/4-20 UNC-2B blind tapped holes, spaced 120 degrees apart on a 2.5 in. (63.5 mm) diameter bolt circle.
  • Leads: 48 in.(120 cm) of four or five conductors, gas and oil resistant, #18 AWG wire.